 Self-Locking
Place Bolts
Type AA (6 Slot) and
Asymmetrical (5 Slot)
Self-Locking Place Bolts can solve the problem of bolt loosening due to
vibration or cyclical stresses without extra components such as lock washers
or lock nuts. Bolting material becomes elastic under stress, and elastic
deformation is the key to the holding force of Place Bolts. Because of
the head and recess configuration, the ability to deform elastically is
increased. So, the greater the clamping force applied, the greater the
elastic movement, and, in turn, the greater the locking power. Place Bolts
can be supplied in various materials and sizes. Configurations are available
in either inch or metric sizes.
Size
Ranges:
Diameters:
3/16" to and including 3/4" (M-5 to M-16).
Lengths to 9" depending on diameter and configuration.
Standard
Materials:
Carbon
Steels GR-5 such as: C-1038 and C-1541
Alloy Steels GR-8 such as: SAE 4037, 5135, 8640
Above materials heat treated to required physicals.
Precision
Components | Hex Cap & Flange Screws
| Place Bolts
Connecting Rod Bolts | 12
Point Bolts | Shoulder Bolts | T
& Square Head Bolts
Studs | Specials
| Stainless Steel Fasteners | Valve
Stem & B-7 Fasteners
|
